If you are getting "Reseat Cartridge" message on your Neopost postage meter, your machine/cartridge contacts might be dirty and therefore, not making connection. The following easy steps might help remedy the problem: Take the cartridge out of the machine and with a
If you are experiencing quality problems with your Brother printer, clean the corona wire following the steps below: Open the front cover and leave the machine turned on for 10 minutes to cool down 2. Slowly take out the drum unit and toner cartridge
These instructions work on the following printers: Brother HL31980cdw Brother MFC9130cw Brother MFC9330cdw Brother MFC9340cdw Make sure the machine is turned on Lift the top cover using the indented handle in the center until you hear click 3.
Is your printer asking you to replace the drum even after you replaced it with a new one? If so, please follow these easy steps to fix the issue: Reset Brother MFC-L2700dw Drum: 1. Make sure that the machine is turned on. 2. Open the front cover. 3. Press and
There could be a number of reasons why a cartridge does not fit in your printer: 1. You Could have the wrong cartridge. Double check to make sure you received the correct toner cartridge. 2. If your new cartridge looks different than the one you took out of the
If you would like to learn how to replace the imaging unit (drum unit) in a Xerox Phaser 6600 or 6605 printer, please watch this helpful video. To order Xerox toner cartridges or Imaging units, call us at 760-431-3756. Check out our wide selection of Xerox Toner and