If you are experiencing quality problems with your Brother printer, clean the corona wire following the steps below:
- Open the front cover and leave the machine turned on for 10 minutes to cool down
2. Slowly take out the drum unit and toner cartridge assembly.
- We recommend that you place the drum unit and toner cartridge assembly on a clean, flat surface with a sheet of disposable paper or cloth underneath it in case you accidentally spill or scatter toner.
- Handle the toner cartridge carefully. If toner scatters on your hands or clothes, immediately wipe or wash it off with cold water.
- To prevent damage to the machine caused by static electricity, DO NOT touch the electrodes shown in the illustration.
3. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times.
Be sure to return the tab to the home position (1). If you do not, printed pages may have a vertical stripe.
4. Put the drum unit and toner cartridge assembly back into the machine. Close the front cover.
If the “Drum Error” is displayed on the LCD after you cleaned the corona wire, the drum unit is near the end of its life. We recommend that you obtain a new drum unit to replace the current one.
If you would like to order a drum unit or get a price, please give us a call at 760-431-3756 or email: info@toner-inkjet.com